Element 3 Question 3-78L5
C3L78: Measurement Procedures
A communications technician would perform a modulation-acceptance bandwidth test in order to:
- Ascertain the audio frequency response of the receiver.
- Determine whether the CTCSS in the receiver is operating correctly.
- Verify the results from a 12 dB SINAD test.
- Determine the effective bandwidth of a communications receiver. (correct answer)
Correct answer: D, Determine the effective bandwidth of a communications receiver.
Explanation
Modulation acceptance bandwidth shows how much frequency deviation a receiver can accept before its IF filtering and detector distort the signal, so it gives the receiver's effective bandwidth. In the usual method, you set the RF input 6 dB above the 12 dB SINAD level. You then raise the deviation until SINAD falls back to 12 dB. The deviation at that point is the acceptance bandwidth.
Why the other answers are wrong
- A, Ascertain the audio frequency response of the receiver.: Audio frequency response is measured by sweeping the modulating tone at fixed deviation. Acceptance bandwidth varies the deviation instead and tests the RF/IF passband.
- B, Determine whether the CTCSS in the receiver is operating correctly.: CTCSS is checked by sending the correct and incorrect subaudible tones to see if the squelch opens. That test has nothing to do with acceptance bandwidth.
- C, Verify the results from a 12 dB SINAD test.: The 12 dB SINAD level is used as a reference within the test, but the purpose of the test is to find bandwidth, not to confirm a sensitivity reading.