Element 3 Question 3-89N3
C3N89: NMEA Data
What might occur in NMEA 2000 network topology if one device in line should fail?
- The system shuts down until the device is removed.
- Other electronics after the failed device will be inoperable.
- The main fuse on the backbone may open.
- There will be no interruption to all other devices. (correct answer)
Correct answer: D, There will be no interruption to all other devices.
Explanation
NMEA 2000 uses a backbone with a terminator at each end. Each device connects to it through a T-connector and a short drop cable. The devices aren't daisy-chained through one another, so if one fails or is unplugged, the backbone stays intact. Every other device keeps exchanging data without interruption.
Why the other answers are wrong
- A, The system shuts down until the device is removed.: Nothing in the network needs the failed unit to be removed before working. The other devices keep talking over the intact backbone.
- B, Other electronics after the failed device will be inoperable.: That would be true of a daisy chain, where data passes through each unit. In NMEA 2000 devices hang off the backbone, so later devices aren't cut off.
- C, The main fuse on the backbone may open.: A failed device normally just stops communicating. An ordinary device fault gives no reason for the backbone's main fuse to open.