Element 8 Question 8-13B3
C8B13: Modulation
A shipboard RADAR uses a PFN driving a magnetron cathode through a step-up transformer. This results in which type of modulation?
- Frequency modulation.
- Amplitude modulation.
- Continuous Wave (CW) modulation.
- Pulse modulation. (correct answer)
Correct answer: D, Pulse modulation.
Explanation
The PFN stores energy between transmissions. When the switch fires, it releases that energy as one brief rectangular pulse. The step-up pulse transformer raises this to the many kilovolts the magnetron cathode needs. The magnetron oscillates only during each pulse, so the RF leaves as short bursts separated by long quiet listening periods. That on/off keying is pulse modulation.
Why the other answers are wrong
- A, Frequency modulation.: The magnetron's frequency is fixed by its resonant cavities. Nothing in a PFN/pulse-transformer modulator deliberately varies the carrier frequency.
- B, Amplitude modulation.: Amplitude modulation varies the carrier level continuously with a signal. Here the magnetron is simply switched fully on for a fixed pulse, then off.
- C, Continuous Wave (CW) modulation.: A CW transmitter never stops, so a single-antenna radar could not hear its echoes. The PFN exists to make the magnetron transmit in short pulses.