Element 8 Question 8-17B6
C8B17: Timer - Trigger - Synchronizer Circuits
Unblanking pulses are produced by the timer circuit. Where are they sent?
- IF amplifiers.
- Mixer.
- CRT. (correct answer)
- Discriminator.
Correct answer: C, CRT.
Explanation
Unblanking pulses go to the CRT, usually to the control grid or cathode. They turn the electron beam on only while the sweep is running, so the trace and echoes show during the listening period. The beam stays dark during retrace. Because the timer starts the pulse in step with the transmit pulse, the trace begins at zero range.
Why the other answers are wrong
- A, IF amplifiers.: The IF amplifiers carry echo signals; they do not need beam blanking. Their gain is controlled by gain/STC circuits, not unblanking pulses.
- B, Mixer.: The mixer combines the echo with the local oscillator to make the IF; it has no electron beam to blank or unblank.
- D, Discriminator.: A discriminator gives AFC error voltage or FM detection; unblanking pulses only control the display's electron beam.