Element 8 Question 8-19C2
C8C19: Receiving Systems
Logarithmic receivers:
- Can’t be damaged.
- Can’t be saturated. (correct answer)
- Should not be used in RADAR systems.
- Have low sensitivity.
Correct answer: B, Can’t be saturated.
Explanation
A logarithmic receiver's output grows with the logarithm of its input, so each tenfold increase in echo strength adds only a fixed step of output. This compresses a dynamic range of 80 dB or more into a usable video level. As a result, strong echoes and sea clutter do not drive it into saturation and wash out weaker targets nearby.
Why the other answers are wrong
- A, Can’t be damaged.: A log receiver's mixer diodes and stages can still be destroyed by excess RF, such as transmitter leakage through a failed TR cell.
- C, Should not be used in RADAR systems.: Log receivers are widely used in radar precisely because their wide dynamic range resists clutter saturation.
- D, Have low sensitivity.: Log compression acts on strong signals. Sensitivity to weak echoes stays high and is set mainly by the front-end noise figure.