Element 8 Question 8-20C3
C8C20: Mixers
An RF mixer has what purpose in a RADAR system?
- Mixes the CW transmitter output to form pulsed waves.
- Converts a low-level signal to a different frequency. (correct answer)
- Prevents microwave oscillations from reaching the antenna.
- Combines audio tones with RF to produce the RADAR signal.
Correct answer: B, Converts a low-level signal to a different frequency.
Explanation
The returning echo is very weak and at microwave frequency, which is hard to amplify directly. The mixer combines it with the local oscillator signal. Their difference, for example 9,460 MHz − 9,400 MHz = 60 MHz, is a much lower intermediate frequency. That IF can be amplified efficiently before detection, so the mixer is a frequency converter for low-level signals.
Why the other answers are wrong
- A, Mixes the CW transmitter output to form pulsed waves.: The magnetron makes pulses directly when the modulator switches it on. There is no CW transmitter output for a mixer to chop into pulses.
- C, Prevents microwave oscillations from reaching the antenna.: Keeping the transmitter and receiver apart is the duplexer's job (TR/ATR tubes or a circulator), not the mixer's.
- D, Combines audio tones with RF to produce the RADAR signal.: A radar pulse carries no audio. The magnetron output is unmodulated RF switched on and off by the modulator.