Element 8 Question 8-21C3
C8C21: Local Oscillators
What component of a RADAR receiver is represented by block 48 in Fig. 8A1?
- Klystron (local oscillator). (correct answer)
- Discriminator.
- IF amplifier.
- Crystal detector.
Correct answer: A, Klystron (local oscillator).
Explanation
Block 48 is the reflex klystron local oscillator. It feeds both the receive crystal detector, to make the 30 or 40 MHz IF from the echoes, and the AFC mixer at 49. The arrow from the AFC output circuit comes back to 48 because AFC tunes the klystron, usually through its reflector (repeller) voltage. That keeps the oscillator the right IF away from the magnetron frequency.
Why the other answers are wrong
- B, Discriminator.: The discriminator is block 50 in the AFC loop. It produces the correction voltage but does not generate the microwave signal sent to the mixers.
- C, IF amplifier.: The IF amplifiers are labeled in the figure and come after the mixers. Block 48 instead feeds into both mixers.
- D, Crystal detector.: The receive crystal detector is labeled in the figure, and 49 is the AFC mixer. Block 48 supplies the oscillator signal to both.