Element 8 Question 8-27C2
C8C27: Interference Issues
The primary cause of noise in a RADAR receiver can be attributed to:
- Electrical causes.
- Atmospheric changes.
- Poor grounding.
- Thermal noise caused by RADAR receiver components. (correct answer)
Correct answer: D, Thermal noise caused by RADAR receiver components.
Explanation
The basic noise floor of a radar receiver comes from thermal (Johnson) noise. This is the random motion of electrons in resistors, mixer diodes and amplifier transistors, especially in the front end. It sets the minimum detectable signal, which is why receiver noise figure, mainly set by the first stage, is a key performance measure.
Why the other answers are wrong
- A, Electrical causes.: Electrical interference from motors, supplies or wiring can add noise, but it is an external, avoidable source. It is not the basic cause.
- B, Atmospheric changes.: Atmospheric effects produce clutter and propagation changes. They are not the main source of the receiver's internal noise.
- C, Poor grounding.: Poor grounding can let interference in. It is an installation fault, not the fundamental noise mechanism every receiver has.