Element 8 Question 8-28C5
C8C28: Miscellaneous
An ion discharge (TR) cell is used to:
- Protect the transmitter from high SWRs.
- Lower the noise figure of the receiver.
- Tune the local oscillator of the RADAR receiver.
- Protect the receiver mixer during the transmit pulse. (correct answer)
Correct answer: D, Protect the receiver mixer during the transmit pulse.
Explanation
During the transmit pulse, the duplexer must keep kilowatts of magnetron power out of the receiver. The TR (transmit-receive) cell is a gas-filled tube in the receiver arm. It ionizes almost instantly when the pulse arrives, shorting the waveguide and reflecting the energy away from the delicate crystal mixer. When the pulse ends, the gas deionizes and weak echoes pass through to the receiver.
Why the other answers are wrong
- A, Protect the transmitter from high SWRs.: High-SWR protection for the magnetron comes from a ferrite isolator or circulator. The TR cell guards the receiver, not the transmitter.
- B, Lower the noise figure of the receiver.: A TR cell adds a little insertion loss, which slightly worsens noise figure. A low-noise RF amplifier is what lowers it.
- C, Tune the local oscillator of the RADAR receiver.: Local oscillator tuning is done by the AFC loop and the manual tune control, not by a gas discharge tube.