Element 8 Question 8-29D2
C8D29: Displays
Voltages used in CRT anode circuits are in what range of value?
- 0.5-10 mV.
- 10-50 kV. (correct answer)
- 20-50 mV.
- 200-1000 V.
Correct answer: B, 10-50 kV.
Explanation
A cathode ray tube needs a very high anode (accelerating) voltage so the electron beam hits the phosphor hard enough to make a bright, visible trace. Monochrome radar and TV CRTs typically run around 10 to 25 kV, and large color tubes run up to about 30 kV, which puts the anode in the 10-50 kV range. That is why CRT anode circuits stay dangerous after power-off: the tube acts as a capacitor and holds its charge.
Why the other answers are wrong
- A, 0.5-10 mV.: 0.5-10 mV is a weak signal level, like receiver front-end or video input signals. It is millions of times too low to accelerate a CRT beam.
- C, 20-50 mV.: 20-50 mV is again a small-signal level. Supply voltages for the tube's electrodes are in the hundreds to tens of thousands of volts.
- D, 200-1000 V.: 200-1000 V is typical of the CRT's grid and focus electrodes, not the final high-voltage anode, which needs kilovolts.