Element 8 Question 8-30D5
C8D30: Video Amplifiers and Sweep Circuits
The main purpose of the sweep generator is to provide:
- Antenna information.
- Range rings.
- Composite video to the cathode of the CRT.
- The drive signal to the sweep amplifier. (correct answer)
Correct answer: D, The drive signal to the sweep amplifier.
Explanation
The sweep generator is triggered by the synchronizer at each transmitted pulse. It produces a linear ramp (sawtooth) waveform. That ramp is the drive signal for the sweep amplifier, which supplies enough current to the deflection coils to move the beam from the center outward. Distance along the trace then corresponds to range.
Why the other answers are wrong
- A, Antenna information.: Antenna bearing information comes from the resolver or synchro on the antenna shaft, not from the sweep generator.
- B, Range rings.: Range rings come from a range-marker generator and are mixed into the video. They are not the sweep generator's job.
- C, Composite video to the cathode of the CRT.: Composite video for the CRT cathode is the output of the video amplifier, not the sweep generator.