Element 8 Question 8-33D1
C8D33: Variable Range Markers
The variable range marker signal is normally fed to the input of the:
- Sweep amplifier.
- Low voltage power supply regulator.
- Video amplifier. (correct answer)
- Range ring oscillator.
Correct answer: C, Video amplifier.
Explanation
The variable range marker (VRM) is a brightening pulse set by an adjustable delay after the timer trigger. It is fed into the video amplifier, where it is mixed with the received echoes and fixed rings. It then intensifies the CRT at the selected range, so the operator can lay the ring on a target and read its distance.
Why the other answers are wrong
- A, Sweep amplifier.: The sweep amplifier drives the deflection waveform. Adding a marker pulse there would distort the sweep instead of brightening a ring.
- B, Low voltage power supply regulator.: The low voltage supply regulator only supplies DC power; it carries no display signals.
- D, Range ring oscillator.: The range ring oscillator generates the fixed rings. Its output, like the VRM, also goes to the video amplifier.