Element 8 Question 8-37D3
C8D37: Display System Power Supplies
In a display system power supply what is the purpose of the chopper?
- It acts as an electronic switch between the raw DC output and the inverter. (correct answer)
- It interrupts the AC supply line at a varying rate depending on the load demands.
- It regulates the 5 volt DC output.
- It pre-regulates the AC input.
Correct answer: A, It acts as an electronic switch between the raw DC output and the inverter.
Explanation
In a switch-mode display supply, the AC line is first rectified and filtered into raw DC. The chopper is a transistor switch that turns this raw DC on and off rapidly and passes the resulting pulses to the inverter and transformer stage. Varying the chopper's duty cycle controls how much energy is passed along, which is how the supply holds its outputs steady.
Why the other answers are wrong
- B, It interrupts the AC supply line at a varying rate depending on the load demands.: The chopper works on rectified DC, not on the AC line. Interrupting the raw AC mains is not how a switching supply operates.
- C, It regulates the 5 volt DC output.: The 5 V output is held steady by feedback and output regulation. The chopper switches raw DC for all the outputs, not just the 5 V rail.
- D, It pre-regulates the AC input.: Nothing pre-regulates the AC. The input is simply rectified to DC, and the chopper then acts on that DC, not on the AC input.