Element 8 Question 8-37D6
C8D37: Display System Power Supplies
What display system power supply output would use a tripler circuit?
- The logic circuit supply.
- The sweep circuit supply.
- The HV supply for the CRT anode. (correct answer)
- The resolver drive
Correct answer: C, The HV supply for the CRT anode.
Explanation
A voltage tripler is a diode-capacitor multiplier. It roughly triples the peak AC voltage from a transformer winding. It suits only high-voltage, very low-current loads, which describes the CRT anode at about 17 kV. Using a tripler means the transformer secondary needs only about a third of that voltage, which eases the insulation demands.
Why the other answers are wrong
- A, The logic circuit supply.: The 5 V logic supply is low voltage and high current, so it uses a simple rectifier and regulator, not a voltage multiplier.
- B, The sweep circuit supply.: The 12 V sweep supply is rectified directly from a low-voltage winding. A multiplier would add nothing and would sag under the load.
- D, The resolver drive: The resolver drive is an AC reference excitation for the antenna-position resolver, not a high-voltage DC output.