Element 8 Question 8-38D3
C8D38: Miscellaneous
In order to ensure that a practical filter is able to remove undesired components from the output of an analog-to-digital converter, the sampling frequency should be:
- The same as the lowest component of the analog frequency.
- Two times the highest component of the analog frequency.
- Greater than two times the highest component of the sampled frequency. (correct answer)
- The same as the highest component of the sampled frequency.
Correct answer: C, Greater than two times the highest component of the sampled frequency.
Explanation
The Nyquist criterion says a signal must be sampled at least twice as fast as its highest frequency component to avoid aliasing. Sampling at exactly twice would require an ideal brick-wall filter. Real filters have a gradual rolloff, so the sampling rate must be greater than twice the highest component to leave a guard band the filter can work within.
Why the other answers are wrong
- A, The same as the lowest component of the analog frequency.: Sampling at the lowest frequency component is far below the Nyquist rate, so the higher components would alias badly.
- B, Two times the highest component of the analog frequency.: Exactly twice is the theoretical minimum and works only with an ideal filter. A practical filter needs a margin above it.
- D, The same as the highest component of the sampled frequency.: Sampling at only the highest frequency is half the Nyquist rate, so that component would alias down to a false low frequency.