Element 8 Question 8-40E4
C8E40: Transmission Lines
A certain length of transmission line has a characteristic impedance of 72 ohms. If the line is cut at its center, each half of the transmission line will have a ZO of:
- 36 ohms.
- 144 ohms.
- 72 ohms. (correct answer)
- The exact length must be known to determine Zo.
Correct answer: C, 72 ohms.
Explanation
Characteristic impedance is set by the line's construction: conductor size and spacing and the dielectric. These fix L and C per unit length. Length does not enter ZO = √(L/C), because cutting the line reduces total L and C in the same proportion. Each half is still a 72 Ω line.
Why the other answers are wrong
- A, 36 ohms.: Halving 72 Ω treats ZO like a resistance proportional to length. ZO is a per-unit-length ratio, independent of length.
- B, 144 ohms.: Doubling to 144 Ω also wrongly assumes ZO changes with length. The construction, not the length, sets ZO.
- D, The exact length must be known to determine Zo.: Length matters for the input impedance of a mismatched line, but not for its characteristic impedance.