Element 8 Question 8-40E6
C8E40: Transmission Lines
What precautions should be taken with horizontal waveguide runs?
- They should be sloped slightly downwards at the elbow and a small drain hole drilled in the elbow. (correct answer)
- They should be absolutely level.
- They should not exceed 10 feet in length.
- None of the above.
Correct answer: A, They should be sloped slightly downwards at the elbow and a small drain hole drilled in the elbow.
Explanation
Moisture is the main hazard in waveguide runs. Condensation collecting inside raises loss, alters the impedance, can cause arcing and corrodes the walls. A slight downward slope toward the elbow lets the water run to a low point. A small drain hole there lets it escape without noticeably affecting the guide's performance.
Why the other answers are wrong
- B, They should be absolutely level.: A dead-level run gives condensation nowhere to drain, so water pools inside the guide.
- C, They should not exceed 10 feet in length.: No fixed 10-foot limit applies. Run length is limited by acceptable attenuation, and runs are kept as short as practical.
- D, None of the above.: Sloping toward the elbow with a drain hole is a valid precaution, so 'none of the above' is false.