Element 8 Question 8-41E2
C8E41: Antenna to Display Interface
On a basic synchro system, the angular information is carried on the:
- DC feedback signal.
- Stator lines. (correct answer)
- Deflection coils.
- Rotor lines.
Correct answer: B, Stator lines.
Explanation
A synchro transmitter's rotor gets a fixed AC reference voltage on its rotor lines, R1 and R2. Its three stator windings sit 120° apart, and the voltages induced in them change in amplitude and phase with shaft angle. The angle therefore travels to the receiving synchro on the three stator lines, S1, S2 and S3.
Why the other answers are wrong
- A, DC feedback signal.: A synchro is an AC device with no DC feedback signal; the angle is encoded in the relative AC voltages on the stator leads.
- C, Deflection coils.: Deflection coils sit on a CRT display's yoke and are driven by the sweep circuits. They do not carry angle between synchros.
- D, Rotor lines.: The rotor lines carry the constant AC reference, which is the same at every shaft angle, so they carry no position information.