Element 8 Question 8-41E5
C8E41: Antenna to Display Interface
An antenna synchro transmitter is composed of the following:
- Three rotor and two stator windings.
- Two rotor and three stator windings. (correct answer)
- Three rotor and three stator windings.
- A single rotor and 3 stator windings.
Correct answer: B, Two rotor and three stator windings.
Explanation
A synchro transmitter's rotor is brought out on two leads, R1 and R2, which receive the AC reference; the 'two rotor' count refers to these rotor connections. The stator has three windings spaced 120° apart, usually Y-connected, brought out as S1, S2 and S3 to carry the angle to the display.
Why the other answers are wrong
- A, Three rotor and two stator windings.: This reverses the parts: the three-winding set is on the stator, and the rotor carries only the reference excitation.
- C, Three rotor and three stator windings.: Three rotor and three stator windings describes a differential synchro, which adds or subtracts angles. It is not a basic transmitter.
- D, A single rotor and 3 stator windings.: The rotor is physically one coil, but here it is counted by its two terminals, R1 and R2, so the matching description is two rotor and three stator.