Element 8 Question 8-42E4
C8E42: Waveguides-1
A waveguide is used at RADAR microwave frequencies because:
- It is easier to install than other feedline types.
- It is more rugged than other feedline types.
- It is less expensive than other feedline types.
- It has lower transmission losses than other feedline types. (correct answer)
Correct answer: D, It has lower transmission losses than other feedline types.
Explanation
At radar frequencies coax loses a lot of power, mostly as heat in its small center conductor and its dielectric. A hollow waveguide has no center conductor. Its wall currents spread over a large surface, and the energy travels mostly through air. Attenuation stays low, and the guide can carry the magnetron's high peak power without arcing. That low loss is the reason radar uses waveguide despite its drawbacks.
Why the other answers are wrong
- A, It is easier to install than other feedline types.: Waveguide is harder to install than coax: it is rigid, needs precise flanges and bends of limited radius, and must be kept dry or pressurized.
- B, It is more rugged than other feedline types.: Waveguide is sturdy, but ruggedness is not why it is chosen. Dents or moisture inside actually spoil its performance.
- C, It is less expensive than other feedline types.: Precision-machined copper or brass waveguide with flanges, bends and rotary joints costs more than coax, not less.