Element 8 Question 8-43E6
C8E43: Waveguides-2
At microwave frequencies, waveguides are used instead of conventional coaxial transmission lines because:
- They are smaller and easier to handle.
- They have considerably less loss. (correct answer)
- They are lighter since they have hollow centers.
- Moisture is never a problem with them.
Correct answer: B, They have considerably less loss.
Explanation
At microwave frequencies, coax loses a lot of power. Skin effect concentrates current on the small center conductor, and the solid dielectric absorbs energy. A waveguide has no center conductor and uses an air (or dry-gas) dielectric. Current flows over a large inner wall area, so attenuation is far lower. That is why the run from the radar transceiver to the antenna is usually waveguide.
Why the other answers are wrong
- A, They are smaller and easier to handle.: Waveguide is rigid and bulky, with its size set by the wavelength, so it is harder to route and handle than flexible coax, not easier.
- C, They are lighter since they have hollow centers.: Being hollow is not the reason it is chosen. A rigid metal tube is not meaningfully lighter than coax; the advantage is lower loss.
- D, Moisture is never a problem with them.: Moisture is a real hazard in waveguide: condensation raises loss and can cause arcing, which is why runs are sealed, drained or pressurized with dry air.