Element 8 Question 8-44F5
C8F44: Equipment Faults-1
In a RADAR using digital video processing, a bright, wide ring appears at a fixed distance from the center of the display on all digital ranges. The transmitter is operating normally. What receiver circuit would you suspect is causing the problem?
- VRM circuit.
- Video storage RAM or shift register. (correct answer)
- Range ring generator.
- EBL circuit.
Correct answer: B, Video storage RAM or shift register.
Explanation
Digital radars store the returns in RAM or a shift register by range cell. Each memory location maps to a fixed position from the display center. A stuck or failed memory cell or bit therefore paints a bright ring at the same screen distance on every digital range, independent of the transmitter. The fault follows the memory address, not the actual range.
Why the other answers are wrong
- A, VRM circuit.: The variable range marker is a thin operator-controlled ring that moves with its control, not a fixed bright wide ring.
- C, Range ring generator.: A range ring generator fault affects the set of thin, evenly spaced calibration rings, not a single bright wide band on all ranges.
- D, EBL circuit.: The electronic bearing line is a radial line from the center; an EBL fault cannot produce a ring.