Element 8 Question 8-45F1
C8F45: Equipment Faults-2
A circuit card in a RADAR system has just been replaced with a spare card. You notice the voltage level at point E in Fig. 8F12 is negative 4.75 volts when the inputs are all at 5 volts. The problem is:
- The 25 K resistor is open.
- The 100 K resistor has been mistakenly replaced with a 50 K resistor.
- The op amp is at the rail voltage.
- The 50 K resistor has been mistakenly replaced with a 25 K resistor. (correct answer)
Correct answer: D, The 50 K resistor has been mistakenly replaced with a 25 K resistor.
Explanation
For an inverting summing amplifier, E = −Rf × Σ(V/R). Normally, E = −10 kΩ × 5 V × (1/200k + 1/100k + 1/50k + 1/25k) = −10 kΩ × 0.375 mA = −3.75 V. The reading is −4.75 V, which means 0.1 mA of extra input current. A 25 kΩ resistor in place of the 50 kΩ raises that branch's current from 0.1 mA to 0.2 mA, which adds exactly that 0.1 mA and gives −4.75 V.
Why the other answers are wrong
- A, The 25 K resistor is open.: An open 25 kΩ resistor removes 0.2 mA of input current, so E would fall in magnitude to −1.75 V, not rise to −4.75 V.
- B, The 100 K resistor has been mistakenly replaced with a 50 K resistor.: Swapping the 100 kΩ for a 50 kΩ adds only 0.05 mA, giving E = −4.25 V, not −4.75 V.
- C, The op amp is at the rail voltage.: A saturated op amp would sit near its supply rail. −4.75 V exactly matches a predictable resistor error in the summing network.