Element 8 Question 8-46F1
C8F46: Equipment Faults-3
Silicon crystals are used in RADAR mixer and detector stages. Using an ohmmeter, how might a crystal be checked to determine if it is functional?
- Its resistance should be the same in both directions.
- Its resistance should be low in one direction and high in the opposite direction. (correct answer)
- Its resistance cannot be checked with a dc ohmmeter because the crystal acts as a rectifier.
- It would be more appropriate to use a VTVM and measure the voltage drop across the crystal.
Correct answer: B, Its resistance should be low in one direction and high in the opposite direction.
Explanation
A silicon mixer or detector crystal is a diode. It conducts easily in the forward direction and poorly in reverse. With an ohmmeter, measure across it, then reverse the leads: a good crystal reads low one way and much higher the other, often a ratio of 10:1 or more. Low both ways means it is shorted; high both ways means it is open.
Why the other answers are wrong
- A, Its resistance should be the same in both directions.: Equal resistance in both directions means the junction is shorted or open. A working diode conducts much better one way than the other.
- C, Its resistance cannot be checked with a dc ohmmeter because the crystal acts as a rectifier.: The rectifying action is exactly what a dc ohmmeter detects. Reversing the leads reveals the low forward and high reverse resistance.
- D, It would be more appropriate to use a VTVM and measure the voltage drop across the crystal.: A VTVM voltage-drop test is not the standard quick check. A forward/reverse resistance comparison with an ohmmeter is simpler and adequate.