Element 8 Question 8-47F2
C8F47: Equipment Faults-4
Targets displayed on the RADAR display are not on the same bearing as their visual bearing. What should you first suspect?
- A bad reed relay in the antenna pedestal.
- A sweep length misadjustment.
- One phase of the yoke assembly is open.
- Incorrect antenna position information. (correct answer)
Correct answer: D, Incorrect antenna position information.
Explanation
Radar bearing is the antenna's pointing angle at the moment an echo returns. The display relies on antenna position data from the pedestal (synchro, resolver or encoder, plus the heading marker). If targets are offset from their visual bearings, that position information is the first thing to suspect. Usually the heading marker is misaligned or the azimuth signal is faulty.
Why the other answers are wrong
- A, A bad reed relay in the antenna pedestal.: A bad reed relay is one specific part that can corrupt heading or position data. The first suspect is the antenna position information as a whole.
- B, A sweep length misadjustment.: Sweep length sets the range scale, so a misadjustment causes range errors, not bearing errors.
- C, One phase of the yoke assembly is open.: An open yoke phase distorts or collapses the sweep in some directions rather than producing a clean, consistent bearing offset.