Element 8 Question 8-48F2
C8F48: Maintenance
The echo box is used for:
- Testing the wavelength of the incoming echo signal.
- Testing and tuning of the RADAR unit by providing artificial targets. (correct answer)
- Amplification of the echo signal.
- Detection of the echo pulses.
Correct answer: B, Testing and tuning of the RADAR unit by providing artificial targets.
Explanation
An echo box is a high-Q tuned cavity placed near the antenna. It stores energy from each transmitted pulse and keeps ringing after the pulse ends. This puts an artificial target, a plume spreading out from the center, on the display. The length of the plume shows overall performance: transmitter output, receiver sensitivity and tuning. A technician can therefore check and tune the radar without a real target.
Why the other answers are wrong
- A, Testing the wavelength of the incoming echo signal.: The echo box is a resonant cavity tuned to the transmitter frequency and returns a test signal. It is not a wavemeter for measuring the wavelength of real target echoes.
- C, Amplification of the echo signal.: It is a passive cavity with no gain. Echo amplification happens in the receiver's IF amplifier stages.
- D, Detection of the echo pulses.: Detecting echo pulses is the job of the receiver's detector (demodulator) stage. The echo box only generates a test return.