Element 8 Question 8-7A5
C8A07: Components-1
Which is typical current for a silicon crystal used in a RADAR mixer or detector circuit?
- 3 mA (correct answer)
- 15 mA
- 50 mA
- 100 mA
Correct answer: A, 3 mA
Explanation
Radar mixers and detectors use tiny point-contact silicon crystal diodes with a very fragile junction. In normal operation they pass only a small rectified current, roughly 0.5 to 3 mA. This is what the crystal-current meter reads when you tune the local oscillator, so a reading of a few milliamps is normal. Tens of milliamps would burn out the contact.
Why the other answers are wrong
- B, 15 mA: 15 mA is several times the normal level. It points to excess local-oscillator drive, which overloads a point-contact mixer crystal and risks burning it out.
- C, 50 mA: 50 mA is far beyond what a point-contact crystal can carry. That current would destroy the delicate whisker contact almost immediately.
- D, 100 mA: 100 mA is far beyond the few-milliamp operating current of a point-contact mixer crystal. That much current would burn out the whisker contact at once.