Element 8 Question 8-9A2
C8A09: Circuits-1
The block diagram of a typical RADAR system microprocessor is shown in Fig. 8A2. Choose the most correct statement regarding this system.

- The ALU is used for address decoding.
- The Memory and I/O communicate with peripherals. (correct answer)
- The control unit executes arithmetic manipulations.
- The internal bus is used simultaneously by all units.
Correct answer: B, The Memory and I/O communicate with peripherals.
Explanation
The memory and I/O interface is the only block connected to the external memory and I/O bus. It is the processor's gateway to RAM, ROM and peripheral devices such as radar display or interface circuits, so it handles communication with peripherals. Every other block works only inside the chip on the internal bus.
Why the other answers are wrong
- A, The ALU is used for address decoding.: The ALU does arithmetic and logic on operands. Address decoding for memory and peripherals is done elsewhere.
- C, The control unit executes arithmetic manipulations.: The control unit decodes instructions held in the IR and sequences operations. It does no arithmetic, which is the ALU's job.
- D, The internal bus is used simultaneously by all units.: A shared bus carries one transfer at a time. Units take turns using it under the control unit's timing, not all at once.