Element 8 Question 8-9A5
C8A09: Circuits-1
In the Line-Driver/Coax/Line-receiver circuit shown in Fig. 8A3, what component is represented by the blank box marked "X"?
- 25-ohm resistor.
- 51-ohm resistor. (correct answer)
- 10-microhm inductor.
- 20-microhm inductor.
Correct answer: B, 51-ohm resistor.
Explanation
The line driver sends pulses down a 50 Ω coaxial cable. To stop reflections and ringing, the receiving end must be terminated in a resistance equal to the cable's characteristic impedance. Box X shunts the line to ground at the 8121 receiver input, so it is the termination resistor. 51 Ω is the nearest standard 5% value to 50 Ω and gives a near-perfect match.
Why the other answers are wrong
- A, 25-ohm resistor.: A 25 Ω load on a 50 Ω line is a 2:1 mismatch. Part of each pulse would reflect back and distort the data.
- C, 10-microhm inductor.: An inductor isn't a matching resistive load. At DC it shorts the line to ground, so logic levels would never reach the receiver.
- D, 20-microhm inductor.: Any shunt inductor gives a reactive termination and a DC short to ground, whatever its value. Only a resistance near 50 Ω terminates the cable properly.