Amateur Extra Question E0A04
E0A: Safety: RF radiation hazards; hazardous materials; grounding
When evaluating a site with multiple transmitters operating at the same time, the operators and licensees of which transmitters are responsible for mitigating over-exposure situations?
- Each transmitter that produces 20 percent or more of its MPE limit in areas where the total MPE limit is exceeded
- Each transmitter operating with a duty cycle greater than 25 percent
- Each transmitter that produces 5 percent or more of its MPE limit in areas where the total MPE limit is exceeded (correct answer)
- Each transmitter operating with a duty cycle greater than 50 percent
Correct answer: C, Each transmitter that produces 5 percent or more of its MPE limit in areas where the total MPE limit is exceeded
Explanation
At a site with several transmitters, FCC rules (47 CFR 1.1307(b)) share responsibility for fixing an over-exposure area among the transmitters that contribute to it. Every transmitter producing 5 percent or more of its own applicable MPE limit in that area shares the responsibility. Transmitters below that threshold are exempt because their contribution is minor.
Why the other answers are wrong
- A, Each transmitter that produces 20 percent or more of its MPE limit in areas where the total MPE limit is exceeded: 20 percent is too high a threshold. The FCC cutoff is 5 percent of a transmitter's MPE limit, so smaller contributors still share responsibility.
- B, Each transmitter operating with a duty cycle greater than 25 percent: Duty cycle affects how much exposure a transmitter produces, but responsibility is assigned by each transmitter's share of its MPE limit, not by a duty-cycle cutoff.
- D, Each transmitter operating with a duty cycle greater than 50 percent: A 50 percent duty cycle is not a legal threshold. A transmitter with any duty cycle shares responsibility if it contributes 5 percent or more of its MPE limit.