Amateur Extra Question E0A10
E0A: Safety: RF radiation hazards; hazardous materials; grounding
When must an RF exposure evaluation be performed on an amateur station operating on 80 meters?
- An evaluation must always be performed (correct answer)
- When the ERP of the station is less than 10 watts
- When the station’s operating mode is CW
- When the output power from the transmitter is less than 100 watts
Correct answer: A, An evaluation must always be performed
Explanation
Under the RF exposure rules in effect since May 3, 2021, there are no band-by-band power levels below which a station is automatically exempt. Every station, on 80 m or any other band, must be evaluated. A result showing the station falls under the exemption formulas still counts as an evaluation. A larger installation may need a full analysis against the maximum permissible exposure (MPE) limits.
Why the other answers are wrong
- B, When the ERP of the station is less than 10 watts: Low ERP does not trigger an evaluation; under current rules every station needs one, whatever its power.
- C, When the station’s operating mode is CW: CW's lower duty cycle reduces average exposure in the calculation, but it does not decide whether an evaluation is required.
- D, When the output power from the transmitter is less than 100 watts: The old 80 m power thresholds were removed, and an evaluation was never required only because power was under 100 W; all stations must now be evaluated.