Amateur Extra Question E0A12
E0A: Safety: RF radiation hazards; hazardous materials; grounding
Where should a shock-absorbing lanyard be attached to a tower when working above ground?
- Above the climber’s head level (correct answer)
- To the belt of the fall-arrest harness
- Even with the climber's waist
- To the next lowest set of guys
Correct answer: A, Above the climber’s head level
Explanation
Anchor a shock-absorbing lanyard above your head. That keeps free-fall distance short: if you slip, the lanyard catches you before you build up much speed. The shock absorber then has less energy to soak up, and the force on your body and the anchor stays lower. The lower the anchor point, the longer and more dangerous the fall.
Why the other answers are wrong
- B, To the belt of the fall-arrest harness: The other end of the lanyard already clips to the harness; attaching it only to the harness gives no anchor on the tower at all.
- C, Even with the climber's waist: A waist-level anchor lets you drop the full lanyard length plus deceleration distance, raising impact forces and fall clearance needed.
- D, To the next lowest set of guys: Guys below you allow a long free fall, and guy wires and their attachments are not rated fall-arrest anchors.