Amateur Extra Question E1C01
E1C: Automatic and remote control; band-specific regulations; operating in and communicating with foreign countries; spurious emission standards; HF modulation index limit; band-specific rules
What is the maximum bandwidth for a data emission on 60 meters?
- 60 Hz
- 170 Hz
- 1.5 kHz
- 2.8 kHz (correct answer)
Correct answer: D, 2.8 kHz
Explanation
On 60 meters every emission, including data, must stay within 2.8 kHz. Section 97.303(h)(3) says operators shall ensure their emissions do not occupy more than 2.8 kHz anywhere in the band, and Section 97.307(f)(14)(i) repeats that limit for phone, RTTY, data and CW. The figure matches a normal SSB voice channel, so a data signal may be as wide as a phone signal but no wider.
Why the other answers are wrong
- A, 60 Hz: 60 Hz comes from the RTTY emission designator 60H0J2B listed for the 60 m channels; it describes that one emission, not the bandwidth cap for data.
- B, 170 Hz: 170 Hz is the familiar frequency shift used for amateur RTTY, not a regulatory bandwidth limit for data on 60 meters.
- C, 1.5 kHz: 1.5 kHz is how far below the channel center frequency the carrier may be set for phone, RTTY and data on the 60 m discrete channels, not the bandwidth limit.
Rule: §97.303