Amateur Extra Question E1C03

E1C: Automatic and remote control; band-specific regulations; operating in and communicating with foreign countries; spurious emission standards; HF modulation index limit; band-specific rules

How long must an operator wait after filing a notification with the Utilities Technology Council (UTC) before operating on the 2200-meter or 630-meter band?

  1. Operators must not operate until approval is received
  2. Operators may operate after 30 days, providing they have not been told that their station is within 1 kilometer of PLC systems using those frequencies (correct answer)
  3. Operators may not operate until a test signal has been transmitted in coordination with the local power company
  4. Operations may commence immediately, and may continue unless interference is reported by the UTC

Correct answer: B, Operators may operate after 30 days, providing they have not been told that their station is within 1 kilometer of PLC systems using those frequencies

Explanation

Under Section 97.303(g)(2), you notify the UTC before operating on 2200 m or 630 m. You may begin after a 30-day period unless the UTC tells you your fixed antenna location is within 1 km of a power line carrier (PLC) system using the same or overlapping frequencies. Silence is the green light: no affirmative approval is needed.

Why the other answers are wrong

Rule: §97.303(g)

Previous: E1C02 · All Amateur Extra questions · Next: E1C04

Practice E1 Commission Rules