Amateur Extra Question E1F11

E1F: Miscellaneous rules: external RF power amplifiers; prohibited communications; spread spectrum; auxiliary stations; Canadian amateurs operating in the US; special temporary authority

Which of the following best describes one of the standards that must be met by an external RF power amplifier if it is to qualify for a grant of FCC certification?

  1. It must produce full legal output when driven by not more than 5 watts of mean RF input power
  2. It must have received an Underwriters Laboratory certification for electrical safety as well as having met IEEE standard 14.101(B)
  3. It must exhibit a gain of less than 23 dB when driven by 10 watts or less
  4. It must satisfy the FCC’s spurious emission standards when operated at the lesser of 1500 watts or its full output power (correct answer)

Correct answer: D, It must satisfy the FCC’s spurious emission standards when operated at the lesser of 1500 watts or its full output power

Explanation

Section 97.317(a)(1) requires an amplifier to meet the spurious emission limits of 97.307(d) or (e) at the lesser of 1.5 kW PEP or its full output power. It must also meet them when switched to standby or off. The other certification standards are gain of no more than 15 dB (97.317(a)(2)) and no amplification from 26 to 28 MHz, which guards against CB use.

Why the other answers are wrong

Rule: §97.317

Previous: E1F10 · All Amateur Extra questions · Next: E2A01

Practice E1 Commission Rules