Amateur Extra Question E2A03
E2A: Amateur radio in space: amateur satellites; orbital mechanics; frequencies and modes; satellite hardware; satellite operations
How is an upload signal processed by an inverting linear transponder?
- The signal is detected and remodulated on the reverse sideband
- The signal is passed through a nonlinear filter
- The signal is reduced to I and Q components, and the Q component is filtered out
- The signal is mixed with a local oscillator signal and the difference product is transmitted (correct answer)
Correct answer: D, The signal is mixed with a local oscillator signal and the difference product is transmitted
Explanation
The transponder mixes the uplink signal with a local oscillator and transmits the difference product: f_down = f_LO - f_up. Because the uplink frequency is subtracted, a rise in uplink frequency lowers the downlink frequency, which is what makes the transponder inverting. No demodulation happens, so every mode in the passband is relayed intact.
Why the other answers are wrong
- A, The signal is detected and remodulated on the reverse sideband: A linear transponder never detects and remodulates signals; it just translates the entire passband in frequency.
- B, The signal is passed through a nonlinear filter: A nonlinear stage would distort SSB and CW signals; linear transponders need linear processing throughout.
- C, The signal is reduced to I and Q components, and the Q component is filtered out: Splitting the signal into I and Q and discarding Q is not how frequency translation in a transponder works.