Amateur Extra Question E2C04
E2C: Contest and DX operating; remote operation techniques; log data format; contact confirmation; RF network systems
Which of the following frequencies can be used for amateur radio mesh networks?
- HF frequencies where digital communications are permitted
- Frequencies shared with various unlicensed wireless data services (correct answer)
- Cable TV channels 41-43
- The 60-meter band channel centered on 5373 kHz
Correct answer: B, Frequencies shared with various unlicensed wireless data services
Explanation
Amateur mesh networks reuse ordinary Wi-Fi hardware, so they run on microwave amateur allocations, mainly near 2.4 GHz and 5.8 GHz (and some 3.4 GHz). Unlicensed Part 15 Wi-Fi devices share these bands. Under Part 97, hams can use higher power and outdoor antennas on certain channels there. These bands are wide enough for high-speed data, which a mesh needs.
Why the other answers are wrong
- A, HF frequencies where digital communications are permitted: HF digital segments allow only narrow signals at slow data rates, far too little bandwidth for a broadband IP mesh network.
- C, Cable TV channels 41-43: Cable TV channel numbers name frequencies inside a coaxial cable system, not over-the-air amateur allocations, so they are not a band hams can transmit a mesh on.
- D, The 60-meter band channel centered on 5373 kHz: The 60-meter channels are limited to about 2.8 kHz bandwidth and low power, nowhere near enough for a high-speed mesh.