Amateur Extra Question E2D05
E2D: Operating methods: digital modes and procedures for VHF and UHF; APRS; EME procedures; meteor scatter procedures
What is the characteristic of the JT65 mode?
- Uses only a 65 Hz bandwidth
- Decodes signals with a very low signal-to-noise ratio (correct answer)
- Symbol rate is 65 baud
- Permits fast-scan TV transmissions over narrow bandwidth
Correct answer: B, Decodes signals with a very low signal-to-noise ratio
Explanation
JT65 was designed to decode signals with a very low signal-to-noise ratio. It works at around -25 dB in a 2500 Hz reference bandwidth, well below what the ear can hear. It achieves this with slow 65-tone FSK, minute-long timed transmissions and strong forward error correction. That makes it useful for EME and other weak-signal work on HF and VHF.
Why the other answers are wrong
- A, Uses only a 65 Hz bandwidth: The 65 refers to the number of tones; a standard JT65A signal occupies roughly 178 Hz, not 65 Hz.
- C, Symbol rate is 65 baud: The 65 is the tone count, not the symbol rate, which is only about 2.7 baud.
- D, Permits fast-scan TV transmissions over narrow bandwidth: JT65 carries short text messages; fast-scan TV needs megahertz of bandwidth, so this description is impossible.