Amateur Extra Question E2D08
E2D: Operating methods: digital modes and procedures for VHF and UHF; APRS; EME procedures; meteor scatter procedures
What type of packet frame is used to transmit APRS beacon data?
- Acknowledgement
- Burst
- Unnumbered Information (correct answer)
- Connect
Correct answer: C, Unnumbered Information
Explanation
APRS beacons such as position reports, weather and status are broadcast to anyone listening, not sent over a link to one station. AX.25 handles this with the Unnumbered Information (UI) frame. A UI frame is connectionless: it needs no link setup and expects no acknowledgment, so any station or digipeater in range can receive, decode and relay it.
Why the other answers are wrong
- A, Acknowledgement: Acknowledgements belong to connected-mode AX.25; APRS beacons are one-way broadcasts that no station acknowledges.
- B, Burst: 'Burst' is not an AX.25 frame type; it loosely describes a short transmission, not the frame format that carries the data.
- D, Connect: Connect frames set up a point-to-point link; APRS deliberately avoids connections so every station can hear every beacon.