Amateur Extra Question E2D10
E2D: Operating methods: digital modes and procedures for VHF and UHF; APRS; EME procedures; meteor scatter procedures
What does the packet path WIDE3-1 designate?
- Three stations are allowed on frequency, one transmitting at a time
- Three subcarriers are permitted, subcarrier one is being used
- Three digipeater hops are requested with one remaining (correct answer)
- Three internet gateway stations may receive one transmission
Correct answer: C, Three digipeater hops are requested with one remaining
Explanation
In an APRS WIDEn-N path, the first number is how many digipeater hops the sender requested and the second is how many hops remain. Each digipeater that relays the packet decrements the second number. WIDE3-1 therefore means three hops were requested, two have been used, and one more relay is allowed.
Why the other answers are wrong
- A, Three stations are allowed on frequency, one transmitting at a time: The path field controls relaying through digipeaters; it says nothing about how many stations may share the frequency.
- B, Three subcarriers are permitted, subcarrier one is being used: APRS uses a single AFSK packet channel with no subcarriers; the numbers in the path count digipeater hops.
- D, Three internet gateway stations may receive one transmission: Internet gateways (IGates) are not counted by the WIDE path; the hop numbers refer to RF digipeaters relaying the packet.