Amateur Extra Question E4A01
E4A: Test equipment: analog and digital instruments; spectrum analyzers; antenna analyzers; oscilloscopes; RF measurements
Which of the following limits the highest frequency signal that can be accurately displayed on a digital oscilloscope?
- Sampling rate of the analog-to-digital converter (correct answer)
- Analog-to-digital converter reference frequency
- Q of the circuit
- All these choices are correct
Correct answer: A, Sampling rate of the analog-to-digital converter
Explanation
A digital oscilloscope samples the input and rebuilds the waveform from those samples. By the Nyquist criterion, the ADC must sample at more than twice the highest frequency in the signal. A 1 GS/s converter, for example, cannot faithfully show signals at or above 500 MHz. In practice several samples per cycle are needed for an accurate shape.
Why the other answers are wrong
- B, Analog-to-digital converter reference frequency: An ADC uses a reference voltage to set its amplitude scale, not a reference frequency, so this does not set the frequency limit.
- C, Q of the circuit: Q describes how sharply a tuned circuit responds; it belongs to the circuit being tested, not the scope's display capability.
- D, All these choices are correct: Only the sampling rate sets the upper frequency limit; the other two items are not real limits on the scope's display.