Amateur Extra Question E4B02
E4B: Measurement technique and limitations: instrument accuracy and performance limitations; probes; techniques to minimize errors; measurement of Q; instrument calibration; S parameters; vector network analyzers; RF signals
What is the significance of voltmeter sensitivity expressed in ohms per volt?
- The full scale reading of the voltmeter multiplied by its ohms per volt rating is the input impedance of the voltmeter (correct answer)
- The reading in volts multiplied by the ohms per volt rating will determine the power drawn by the device under test
- The reading in ohms divided by the ohms per volt rating will determine the voltage applied to the circuit
- The full scale reading in amps divided by ohms per volt rating will determine the size of shunt needed
Correct answer: A, The full scale reading of the voltmeter multiplied by its ohms per volt rating is the input impedance of the voltmeter
Explanation
The ohms-per-volt rating tells you the meter's input resistance on any range. Multiply the rating by the full-scale voltage of the range in use. For example, 20,000 Ω/V x 10 V = 200 kΩ. A higher rating means the meter draws less current and loads high-impedance circuits less, so readings are more accurate.
Why the other answers are wrong
- B, The reading in volts multiplied by the ohms per volt rating will determine the power drawn by the device under test: The rating doesn't give power in the device under test; it describes the meter's own input resistance on a given range.
- C, The reading in ohms divided by the ohms per volt rating will determine the voltage applied to the circuit: Dividing a resistance reading by the rating has no physical meaning and doesn't yield the circuit's applied voltage.
- D, The full scale reading in amps divided by ohms per volt rating will determine the size of shunt needed: Shunt size for an ammeter depends on the movement's full-scale current and resistance, not on dividing by an ohms-per-volt figure.