Amateur Extra Question E4B08
E4B: Measurement technique and limitations: instrument accuracy and performance limitations; probes; techniques to minimize errors; measurement of Q; instrument calibration; S parameters; vector network analyzers; RF signals
Which of the following can be used to determine the Q of a series-tuned circuit?
- The ratio of inductive reactance to capacitive reactance
- The frequency shift
- The bandwidth of the circuit's frequency response (correct answer)
- The resonant frequency of the circuit
Correct answer: C, The bandwidth of the circuit's frequency response
Explanation
The Q of a resonant circuit sets how sharp its response is. You can find Q by measuring the resonant frequency and the bandwidth between the half-power (-3 dB) points, then dividing: Q = f0 / BW. For example, a circuit resonant at 7.1 MHz with a 3 dB bandwidth of 71 kHz has Q = 7,100 kHz / 71 kHz = 100. A higher Q gives a narrower response.
Why the other answers are wrong
- A, The ratio of inductive reactance to capacitive reactance: At resonance, inductive and capacitive reactance are equal, so their ratio is always 1; Q is reactance divided by resistance.
- B, The frequency shift: A frequency shift by itself is not a defined measure of Q; you need the width of the response relative to its center frequency.
- D, The resonant frequency of the circuit: The resonant frequency is only half the calculation; without the bandwidth it tells you nothing about how sharp the response is.