Amateur Extra Question E4B10
E4B: Measurement technique and limitations: instrument accuracy and performance limitations; probes; techniques to minimize errors; measurement of Q; instrument calibration; S parameters; vector network analyzers; RF signals
Which of the following methods measures intermodulation distortion in an SSB transmitter?
- Modulate the transmitter using two RF signals having non-harmonically related frequencies and observe the RF output with a spectrum analyzer
- Modulate the transmitter using two AF signals having non-harmonically related frequencies and observe the RF output with a spectrum analyzer (correct answer)
- Modulate the transmitter using two AF signals having harmonically related frequencies and observe the RF output with a peak reading wattmeter
- Modulate the transmitter using two RF signals having harmonically related frequencies and observe the RF output with a logic analyzer
Correct answer: B, Modulate the transmitter using two AF signals having non-harmonically related frequencies and observe the RF output with a spectrum analyzer
Explanation
The standard two-tone test feeds an SSB transmitter's audio input with two equal-level audio tones that are not harmonically related, such as 700 Hz and 1900 Hz. The transmitter then produces two RF tones. Any nonlinearity creates intermodulation products, such as third-order products at 2f1 - f2 and 2f2 - f1. A spectrum analyzer displays these products next to the wanted tones, so their level can be read in dB.
Why the other answers are wrong
- A, Modulate the transmitter using two RF signals having non-harmonically related frequencies and observe the RF output with a spectrum analyzer: An SSB transmitter is modulated through its audio input, so the test tones must be audio, not RF signals.
- C, Modulate the transmitter using two AF signals having harmonically related frequencies and observe the RF output with a peak reading wattmeter: Harmonically related tones put the distortion products on top of harmonics, and a peak-reading wattmeter cannot separate individual products.
- D, Modulate the transmitter using two RF signals having harmonically related frequencies and observe the RF output with a logic analyzer: Modulating with RF tones is wrong, and a logic analyzer displays digital states, not an RF spectrum.