Amateur Extra Question E4D07
E4D: Receiver performance characteristics: dynamic range; intermodulation and cross-modulation interference; third-order intercept; desensitization; preselector; sensitivity; link margin
Which of the following reduces the likelihood of receiver desensitization?
- Insert attenuation before the first RF stage (correct answer)
- Raise the receiver’s IF frequency
- Increase the receiver’s front-end gain
- Switch from fast AGC to slow AGC
Correct answer: A, Insert attenuation before the first RF stage
Explanation
An attenuator ahead of the first RF stage lowers the strong signal before it can overload the front end, so the stages stay linear and do not compress. The desired signal is attenuated too. On HF, though, atmospheric noise usually sets the noise floor, so the real loss of weak-signal readability is small. Front-end attenuators and RF gain controls exist for exactly this reason.
Why the other answers are wrong
- B, Raise the receiver’s IF frequency: Raising the IF mainly improves image rejection; it does nothing to stop a strong nearby signal from compressing the RF stage and mixer.
- C, Increase the receiver’s front-end gain: More front-end gain makes the strong signal even larger at the mixer, which worsens overload and desensitization.
- D, Switch from fast AGC to slow AGC: AGC speed only changes how fast gain recovers; a strong signal still drives the AGC and front end, so slow AGC does not prevent desensitization.