Amateur Extra Question E4E11
E4E: Noise and interference: external RF interference; electrical and computer noise; line noise; DSP filtering and noise reduction; common-mode current; surge protectors; single point ground panel
What could be the cause of local AM broadcast band signals combining to generate spurious signals on the MF or HF bands?
- One or more of the broadcast stations is transmitting an over-modulated signal
- Nearby corroded metal connections are mixing and reradiating the broadcast signals (correct answer)
- You are receiving skywave signals from a distant station
- Your station receiver IF amplifier stage is overloaded
Correct answer: B, Nearby corroded metal connections are mixing and reradiating the broadcast signals
Explanation
Corroded or loose metal junctions, such as rusty fence wires, gutters or tower bolts, can behave like crude diodes. This nonlinear behavior mixes strong local AM broadcast signals and produces sum, difference and harmonic products. The junction then reradiates those products on MF or HF frequencies. This is often called the "rusty bolt" effect.
Why the other answers are wrong
- A, One or more of the broadcast stations is transmitting an over-modulated signal: Overmodulation causes splatter next to that one station's frequency; it doesn't combine several stations into mixing products.
- C, You are receiving skywave signals from a distant station: A distant skywave signal arrives as one clean signal; it doesn't combine local stations into new spurious frequencies.
- D, Your station receiver IF amplifier stage is overloaded: The IF stage follows the receiver's selectivity and sees only a narrow band, so it can't mix widely spaced broadcast signals together.