Amateur Extra Question E5A10
E5A: Resonance and Q: characteristics of resonant circuits; series and parallel resonance; definitions and effects of Q; half-power bandwidth
What is the resonant frequency of an RLC circuit if R is 33 ohms, L is 50 microhenries, and C is 10 picofarads?
- 7.12 MHz (correct answer)
- 23.5 kHz
- 7.12 kHz
- 23.5 MHz
Correct answer: A, 7.12 MHz
Explanation
Resonance occurs where XL = XC, so f = 1 / (2π√(LC)). Resistance does not change the resonant frequency. LC = 50 x 10^-6 H x 10 x 10^-12 F = 5 x 10^-16, and √(5 x 10^-16) = 2.236 x 10^-8 s. Then f = 1 / (2π x 2.236 x 10^-8 s) = 1 / (1.405 x 10^-7 s) ≈ 7.12 x 10^6 Hz = 7.12 MHz.
Why the other answers are wrong
- B, 23.5 kHz: 23.5 kHz does not come from 1 / (2π√(LC)) and is far too low for microhenries and picofarads, which resonate in the MHz range.
- C, 7.12 kHz: 7.12 kHz has the right digits but is a factor of 1000 too low, a slip when converting the powers of ten for microhenries and picofarads.
- D, 23.5 MHz: 23.5 MHz is about 3.3 times the correct value, as if the 33 ohm resistance had been worked in; R does not set the resonant frequency.