Amateur Extra Question E6A07
E6A: Semiconductor materials and devices: semiconductor materials; bipolar junction transistors; operation and types of field-effect transistors
Which of the following indicates that a silicon NPN junction transistor is biased on?
- Base-to-emitter resistance of approximately 6 ohms to 7 ohms
- Base-to-emitter resistance of approximately 0.6 ohms to 0.7 ohms
- Base-to-emitter voltage of approximately 6 volts to 7 volts
- Base-to-emitter voltage of approximately 0.6 volts to 0.7 volts (correct answer)
Correct answer: D, Base-to-emitter voltage of approximately 0.6 volts to 0.7 volts
Explanation
The base-emitter junction of a silicon transistor behaves like a silicon diode. It begins to conduct significantly at about 0.6 V to 0.7 V of forward bias. Measuring roughly 0.6 V to 0.7 V from base to emitter of an NPN transistor (base positive) shows the junction is forward biased and the transistor is on. Germanium devices turn on at a lower voltage, about 0.2 V to 0.3 V.
Why the other answers are wrong
- A, Base-to-emitter resistance of approximately 6 ohms to 7 ohms: Bias is judged by junction voltage, not resistance, and a forward-biased junction has no fixed resistance value like 6 to 7 ohms.
- B, Base-to-emitter resistance of approximately 0.6 ohms to 0.7 ohms: This mixes up units: the familiar 0.6 to 0.7 figure is the base-emitter voltage, not a resistance in ohms.
- C, Base-to-emitter voltage of approximately 6 volts to 7 volts: 6 V to 7 V is about ten times too high; a forward-biased silicon junction clamps near 0.7 V, and that much forward drive would likely destroy it.