Amateur Extra Question E6A12
E6A: Semiconductor materials and devices: semiconductor materials; bipolar junction transistors; operation and types of field-effect transistors
What is the purpose of connecting Zener diodes between a MOSFET gate and its source or drain?
- To provide a voltage reference for the correct amount of reverse-bias gate voltage
- To protect the substrate from excessive voltages
- To keep the gate voltage within specifications and prevent the device from overheating
- To protect the gate from static damage (correct answer)
Correct answer: D, To protect the gate from static damage
Explanation
A MOSFET gate is insulated from the channel by an extremely thin oxide layer. A static discharge of only tens of volts can puncture that layer and ruin the device. Zener diodes connected from gate to source (or drain) conduct and clamp the voltage before it can exceed the oxide's breakdown. This protects the gate from static damage during handling and in the circuit.
Why the other answers are wrong
- A, To provide a voltage reference for the correct amount of reverse-bias gate voltage: The Zeners clamp only transient overvoltage; they do not set the gate's operating bias, which comes from the bias network.
- B, To protect the substrate from excessive voltages: The vulnerable part is the thin gate oxide, not the substrate; the Zeners are placed across the gate specifically to guard it.
- C, To keep the gate voltage within specifications and prevent the device from overheating: Overheating is caused by drain current and dissipation; the Zeners guard the gate insulation from voltage spikes, not from thermal stress.