Amateur Extra Question E6B07
E6B: Diodes
What causes a junction diode to fail from excessive current?
- Excessive inverse voltage
- Excessive junction temperature (correct answer)
- Insufficient forward voltage
- Charge carrier depletion
Correct answer: B, Excessive junction temperature
Explanation
Current through a diode's forward voltage drop dissipates power as heat (P = V x I), and that heat builds up at the junction. If the current is too high, the junction temperature rises past the semiconductor's limit, around 150–200 °C for silicon. The device then degrades or melts, often failing shorted. This is why diodes have both current ratings and thermal ratings.
Why the other answers are wrong
- A, Excessive inverse voltage: Too much reverse (inverse) voltage causes breakdown failure, which is a separate rating (PIV) from forward current overload.
- C, Insufficient forward voltage: Too little forward voltage just keeps the diode from conducting fully; it cannot cause overcurrent damage.
- D, Charge carrier depletion: Charge carriers are not 'used up' by heavy current; depletion describes the reverse-biased junction region, not a failure mode.